1P603AS Datasheet, PDF (1/10 Pages) Anaren Microwave – W-LAN and MMDS

Features:
 2.3 – 2.7 GHz.
 W-LAN and MMDS
 Low Loss
 High Isolation
 90° Quadrature
 Surface Mountable
 Tape And Reel
 Lead Free
 100% Tested
Outline Drawing
Model 1P603AS
REV A
Hybrid Couplers
3 dB, 90
Description
The 1P603AS is a low profile, high performance 3dB hybrid coupler in an
easy to use, manufacturing friendly surface mount package. It is designed for
W-LAN and MMDS applications. The 1P603AS is designed for balanced
amplifiers, variable phase shifters and attenuators, LNAs, signal distribution
and is an ideal solution for the ever-increasing demands of the wireless
industry for smaller printed circuit boards and high performance. Parts have
been subjected to rigorous qualification testing and they are manufactured
using materials with coefficients of thermal expansion (CTE) compatible with
common substrates such as FR4, G-10, RF-35, RO4003 and polyimide.
Produced with 6 of 6 RoHS compliant tin immersion finish.
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation
Insertion
Loss
GHz
dB Min
dB Max
VSWR
Max:1
2.3 – 2.7
Amplitude
Balance
dB Max
20
Phase
Balance
Degrees
0.30
Power
Ave. CW Watts
1.20
JC
ºC/Watt
Operating
Temp.
ºC
± 0.25
±3
25
30.6
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50  nominal impedance. Specifications subject to change without notice.
Dimensions are in Inches [Millimeters]
1P603AS Mechanical Outline
Part is Symmetric About All Axis
Tolerances are Non-Cumulative
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free:
[phone]
Europe: [phone]