1P503S Datasheet, PDF (1/3 Pages) Anaren Microwave – Hybrid Couplers 3 dB, 90°

Model 1P503S
Rev. A
Hybrid Couplers
3 dB, 90°
Description
The 1P503S Pico Xinger is a low profile, miniature 3dB hybrid coupler in an
easy to use surface mount package designed for DCS and PCS
applications. The 1P503S is designed for balanced amplifiers, variable
phase shifters and attenuators, LNAs, signal distribution and is an ideal
solution for the ever-increasing demands of the wireless industry for smaller
printed circuit boards and high performance. Parts have been subjected to
rigorous qualification testing and units are 100% tested. They are
manufactured using materials with x and y thermal expansion coefficients
compatible with common substrates.
Features:
• 1.7 – 2.0 GHz.
• DCS and PCS
• Low Loss
• High Isolation
• 90o Quadrature
• Surface Mountable
• Tape And Reel
• Lead Free
• 100% Tested
Outline Drawing
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation*
Insertion
Loss
GHz
dB Min
dB Max
VSWR
Max:1
1.7 – 1.8
18
0.25
1.28
1.8 – 2.0
Amplitude
Balance
dB Max
18
Phase
Balance
Degrees
0.25
Power
Ave. CW Watts
1.28
ΘJC
ºC/Watt
Operating
Temp.
ºC
± 0.45
±3
30
27.5
-55 to +85
± 0.30
±3
30
27.5
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. * See Anaren Application Note #AAN-231 for information on
how to improve RF performance on your printed circuit board Specifications subject to
change without notice.
Top View (Near-side)
Side View
Bottom View (Far-side)
Pin 1
.250±.010
[6.35±0.25]
.054±.005
[1.38±0.13]
Pin 2
Pin 2
4X .020±.004
[0.51±0.10]
Pin 1
GND
.200±.010
[5.08±0.25]
.120±.004
[3.05±0.10]
GND
4X .040±.008 SQ
[1.01±0.20]
Pin 4
Denotes Array
Number
Pin 3
Dimensions are in Inches [Millimeters]
1P503S Mechanical Outline
Pin 3
.170±.004
[4.32±0.10]
Pin 4
Part Is Symmetric About All Axis
Tolerances are Non-Cumulative
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]