1J0280-3 Datasheet, PDF (1/1 Pages) Anaren Microwave – Hybrid Couplers

Applications
• Microstrip Circuits
• Divider/Combiners
• Switch Networks
• Balanced Detectors
• Antenna Feeds
Model 1J0280-3
Hybrid Couplers
3 dB, 90°
Features
• Welded Tab Mount
• 2-Way Power Split
• Reliable Performance
• Handles 500 Watts
Outline Drawing
Electrical Specifications
Frequency
MHz
100 - 160
Isolation
dB Min/Typ
20/27
Insert. Loss
dB Max
0.30
VSWR
Max : 1
1.20/1.10
Amp. Bal.
dB Max
±0.30
Phase Bal.
Degrees Max
±2.0
Power
Ave. CW Watts
500
Notes: Electrical specifications apply only with properly designed test fixtures. Testing is done at ambient temper-
ature only. Sample testing is performed to MIL-STD-105, Level 2, AQL 1.0. Test includes coupling, amplitude
balance, insertion loss and isolation. If your application requires additional testing, consult Anaren Power rating
applies when solder tab/coupler interface has been conformally coated. Impedance: 50 ohms. Meets MIL-E-5400
Class 3 requirements. Additional screening available for military and space applications.
Electrical and Mechanical Specifications subject to change without notice.
NOTES:
1. DIMENSIONS ARE IN INCHES OVER (MILLIMETERS)
2. MARKING SHALL BE IN ACCORDANCE WILL MIL-STD-130
3. FINISH:
CHEMICAL CONVERSATION COAT (CLEAR)
PER MIL-C-5541, CLASS 1A
4. SOLDER TAB: 4.1 MATERIAL:FLAT WIRE, COPPER-061,
PER ASTM-B-272 4.2 FINISH:
GOLD PLATE PER MIL-G-45204,
TYPE 3, GRADE A,
CLASS 00. OVER NICKEL SULFAMATE
FLASH PER QQ-N-290, CLASS I.
Sales Desk USA: Voice: [phone] Fax: [phone]
Sales Desk Europe: Voice: ([phone] Fax: [phone]
4.1.13