1H0360-3 Datasheet, PDF (1/1 Pages) Anaren Microwave – Hybrid Couplers

Model 1H0360-3
Hybrid Couplers
High Power 3 dB, 90°
Applications
• Microstrip Circuits
• Power Amps
• Divider/Combiners
• Switch Networks
• Balanced Detectors
• Antenna Feeds
Features
• Welded Tab Mount
• 2-Way Power Split
• Reliable Performance
• Handles 420 Watts
Outline Drawing
Electrical Specifications
Frequency
MHz
225 - 400
Isolation
dB Min/Typ
23
Insert. Loss
dB Max
0.25
VSWR
Max : 1
1.15
Amp. Bal.
dB Max
±0.40
Phase Bal.
Degrees Max
±2.0
Power
Ave. CW Watts
420
Notes: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 requirements. Additional screening available for
military and space applications. Electrical specifications apply only properly designed test fixtures. Testing is done
at ambient temperature only. Sample testing is performed to MIL-Std-105, Level 2, AQL 1.0. Test includes cou-
pling, amplitude balance, insertion loss and isolation. If your application requires additional testing, consult Anaren
Power rating applies when solder tab/coupler interface has been conformally coated.
Electrical and Mechanical Specifications subject to change without notice.
4.2.8
NOTES:
1 Marking:
Marking shall be in accordance with MIL-STD-130
2 Finish:
Chemical conversion coat (clear) per MIL-C-5541, class 1A
3 Solder tab info:
3.1 Material: Flat wire, copper-061, per AST-B-272
3.2 Finish: Gold plate per MIL-G-45204, Type 3,
Grade A, Class 00, over nickel sulfamate
flash per QQ-N-290. Class.
4 Weight:
1.5 oz. Max
5 Dimensions: Inches and (millimeters)
Sales Desk USA: Voice: [phone] Fax: [phone]
Sales Desk Europe: Voice: ([phone] Fax: [phone]