1E1305-3 Datasheet, PDF (1/2 Pages) Anaren Microwave – Surface Mountable

Model 1E1305-3
Rev. A
Hybrid Couplers
3 dB, 90°
Description
The 1E1305-3 is a low profile 3dB hybrid coupler in an easy to use surface
mount package covering the Japanese PDC bandwidth. The 1E1305-3 is
ideal for balanced amplifiers and signal distribution and can be used in most
high power designs. Parts have been subjected to rigorous qualification
testing and units are 100% tested. They are manufactured using materials
with x and y thermal expansion coefficients compatible with common
substrates such as FR4, G-10 and polyamide.
Features:
• 1.20 – 1.85 GHz
• Low Loss
• High Isolation
• 90° Quadrature
• Surface Mountable
• Tape And Reel
• Convenient Package
• 100% Tested
Outline Drawing
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation
Insertion
Loss
GHz
dB Min
dB Max
VSWR
Max:1
1.4 – 1.7
1.20 – 1.85
Amplitude
Balance
dB Max
25
21
Phase
Balance
Degrees
0.25
0.25
Power
Ave. CW Watts
1.15
1.20
ΘJC
ºC/Watt
Operating
Temp.
ºC
± 0.30
±3
100
13.6
-55 to +85
± 0.50
±4
100
13.6
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. Specifications subject to change without notice.
Top View (Near-side)
Side View
Bottom View (Far-side)
Pin 1
.560^±.010
[14.22^±0.25]
.076^±.008
[1.93^±0.20]
Pin 2
.024^±.004 TYP
[0.61^±0.10]
Pin 2
Pin 1
GND
Pin 4
Denotes
Array Number
.350^±.010
[8.89^±0.25]
Pin 3
GND
Pin 3
.050^±.008
[1.27^±0.20]
.050^±.008
[1.27^±0.20]
Pin 4
Dimensions are in Inches [Millimeters]
1E1305-3 Rev A Mechanical Outline
Part Is Symmetric About All Axis
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]