11306-3 Datasheet, PDF (1/3 Pages) Anaren Microwave – Hybrid Couplers

Model 11306-3
Rev. A
Hybrid Couplers
3 dB, 90°
Description
The 11306-3 is a low profile 3dB hybrid coupler in an easy to use surface
mount package covering 2.0 to 4.0 GHz. The 11306-3 is ideal for balanced
amplifiers and signal distribution and can be used in most high power
designs. Parts have been subjected to rigorous qualification testing and
units are 100% tested. They are manufactured using materials with x and y
thermal expansion coefficients compatible with common substrates such as
FR4, G-10 and polyamide.
Features:
• 2.0 – 4.0 GHz
• Low loss
• High Isolation
• 90o Quadrature
• Surface Mountable
• Tape And Reel
• Convenient Package
• 100% Tested
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation
Insertion
Loss
GHz
dB Min
dB Max
VSWR
Max:1
2.0 – 4.0
Amplitude
Balance
dB Max
20
Phase
Balance
Degrees
0.35
Power
Ave. CW Watts
1.30
ΘJC
ºC/ Watt
± 0.55
±5
60
24.6
Operating
Temp.
ºC
-55 to +85
Outline Drawing
**Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 Ω nominal impedance. Specifications subject to change without notice.
Top View (Near-side)
Side View
Bottom View (Far-side)
Pin 1
.560^±.010
[14.22^±0.25]
.075^±.008
[1.91^±0.20]
Pin 2
.024^±.004 TYP
[0.61^±0.10]
Pin 2
Pin 1
GND
Pin 4
Denotes
Array Number
.350^±.010
[8.89^±0.25]
Pin 3
GND
Pin 3
.050^±.008
[1.27^±0.20]
.050^±.008
[1.27^±0.20]
Pin 4
Dimensions are in Inches [Millimeters]
11306-3 Rev A Mechanical Outline
Part Is Symmetric About All Axis
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]