11304-3 Datasheet, PDF (1/2 Pages) Anaren Microwave – Hybrid Couplers 3 dB, 90°

Model 11304-3
Rev. C
Hybrid Couplers
3 dB, 90°
Description
The 11304-3 is a low profile 3dB hybrid coupler in an easy to use surface
mount package covering 500 to 1000 MHz. The 11304-3 is ideal for
balanced amplifiers and signal distribution and can be used in most high
power designs. Parts have been subjected to rigorous qualification testing
and units are 100% tested. They are manufactured using materials with x
and y thermal expansion coefficients compatible with common substrates
such as FR4, G-10 and polyimide.
Features:
• 500 - 1000 MHz
• Low loss
• High Isolation
• 90o Quadrature
• Surface Mountable
• Tape And Reel
• Convenient Package
• 100% Tested
Outline Drawing
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation
Insertion
Loss
MHz
dB Min
dB Max
VSWR
Max:1
500 – 1000
Amplitude
Balance
dB Max
20
Phase
Balance
Degrees
0.35
Power
Ave. CW Watts
1.25
ΘJC
ºC/ Watt
Operating
Temp.
ºC
± 0.55
±3
100
8.6
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 Ω nominal impedance. Specifications subject to change without notice.
Top View (Near-side)
Side View
Pin 1
.650±.010
[16.51±0.25]
.075±.008
[1.91±0.20]
Pin 2
Bottom View (Far-side)
Pin 2
.024±.004 TYP
[0.61±0.10]
Pin 1
GND
.480±.010
[12.19±0.25]
Pin 4
Denotes
Array Number
Pin 3
Dimensions are in Inches [Millimeters]
11304-3 Rev A Mechanical Outline
GND
.050±.008
[1.27±0.20]
Pin 3
.050±.008
[1.27±0.20]
Pin 4
Part Is Symmetric About All Axis
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]