11302-3 Datasheet, PDF (1/3 Pages) Anaren Microwave – Hybrid Couplers 3 dB, 90°

Model 11302-3
Rev. B
Hybrid Couplers
3 dB, 90°
Description
The 11302-3 is a low profile 3dB hybrid coupler in an easy to use surface
mount package for applications in the 225 - 400 MHz band. The 11302-3
is ideal for balanced amplifiers and signal distribution and is an ideal
solution for the ever increasing demands for smaller printed circuit boards.
Parts have been run through rigorous qualification and units are 100%
tested. They are manufactured using materials with x and y thermal
expansion coefficients compatible with common substrates.
Features:
• 225 - 400 MHz
• Low loss
• High Isolation
• 90o Quadrature
• Surface Mountable
• Tape And Reel
• Convenient Package
• 100% Tested
Outline Drawing
Top View (Near-side)
ELECTRICAL SPECIFICATIONS**
Frequency
Isolation
Insertion
Loss
MHz
dB Min
dB Max
VSWR
Max:1
225-400
Amplitude
Balance
dB Max
15
Phase
Balance
Degrees
0.55
Power
Ave. CW Watts
1.40
ΘJC
ºC/ Watt
Operating
Temp.
ºC
± 0.50
±2
100
5.9
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 Ω nominal impedance. Specifications subject to change without notice.
Side View
Bottom View (Far-side)
Pin 1
1.000±.010
[25.40±0.25]
.071±.007
[1.81±0.18]
Pin 2
GND
Pin 4
Denotes
Array Number
.480±.010
[12.19±0.25]
Pin 3
Pin 2
.380±.004
[9.65±0.10]
Pin 3
4X .024±.004
[0.61±0.10]
.900±.004
[22.86±0.10]
Pin 1
GND
4X .050±.004 SQ
[1.27±0.10]
Pin 4
Dimensions are in Inches [Millimeters]
11302-3 Mechanical Outline
Part Is Symmetric About All Axis
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]