|
10261-3 Datasheet, PDF (1/1 Pages) Anaren Microwave – Hybrid Couplers | |||
|
Model 10261-3
Hybrid Couplers
3 dB, 90°
Applications
⢠Microstrip Circuits
⢠Power Amps
⢠Divider/Combiners
⢠Switch Networks
⢠Balanced Detectors
⢠Antenna Feeds
Features
⢠Welded Tab Mount
⢠2-Way Power Split
⢠Reliable Performance
⢠Handles 600 Watts
Outline Drawing
Electrical Specifications
Frequency
MHz
62.5 - 125
Isolation
dB Min/Typ
20/27
Insert. Loss
dB Max
0.35
VSWR
Max : 1
1.20/1.10
Amp. Bal.
dB Max
±0.50
Phase Bal.
Degrees Max
±2.0
Power
Ave. CW Watts
600
Notes: Electrical specifications apply only with properly designed test fixtures. Testing is done at ambient temper-
ature only. Sample testing is performed to MIL-STD-105, Level 2, AQL 1.0. Test includes coupling, amplitude
balance, insertion loss and isolation. If your application requires additional testing, consult Anaren Power rating
applies when solder tab/coupler interface has been conformally coated. Impedance: 50 ohms. Meets MIL-E-5400
Class 3 requirements. Additional screening available for military and space applications.
Electrical and Mechanical Specifications subject to change without notice.
NOTES:
1. DIMENSIONS ARE IN INCHES OVER (MILLIMETERS)
2. MARKING SHALL BE IN ACCORDANCE WILL MIL-STD-130
3. FINISH: CHEMICAL CONVERSATION COAT (CLEAR)
PER MIL-C-5541, CLASS 1A
4. SOLDER TAB:
4.1 MATERIAL:FLAT WIRE, COPPER-061, PER ASTM-B-272
4.2 FINISH: GOLD PLATE PER MIL-G-45204, TYPE 3, GRADE A,
CLASS 00. OVER NICKEL SULFAMATE FLASH PER QQ-N-290,
CLASS I.
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
4.1.8
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
|