AM1431P Datasheet, PDF (2/2 Pages) Analog Power – P-Channel 30-V (D-S) MOSFET

Analog Power
AM1431P
SPECIFICATIONS (T_A = 25^oC UNLESS OTHERWISE NOTED)
Parameter
Symbol
Test Conditions
Static
Gate-Threshold Voltage
Gate-Body Leakage
Zero Gate Voltage Drain Current
On-State Drain Current^A
Drain-Source On-Resistance^A
Forward Tranconductance^A
Diode Forward Voltage
Dynamic^b
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall-Time
VGS(th)
IGSS
IDSS
ID(on)
rDS(on)
gfs
VSD
VDS = VGS, ID = -250 uA
V_DS = 0 V, V_GS = ±20 V
VDS = -24 V, VGS = 0 V
V_DS = -24 V, V_GS = 0 V, T_J = 55^oC
VDS = -5 V, VGS = -4.5 V
VGS = -10 V, ID = -3.1 A
VGS = -4.5 V, ID = -2.5 A
VDS = -5 V, ID = -3.1 A
IS = -0.46 A, VGS = 0 V
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
VDS =-10V, VGS =-4.5V,
ID = -3.1 A
VDD =-10V, IL =-1A,
VGEN = -4.5 V, RG = 6 Ω
Limits
Unit
Min Typ Max
-1
V
±100 nA
-1
uA
-10
-5
A
79
mΩ
110
9
S
-0.65
V
7.2
1.7
nC
1.5
10
9
ns
27
11
Notes
a.
b.
c.
Pulse test: PW <= 300us duty cycle <= 2%.
Guaranteed by design, not subject to production testing.
Repetitive rating, pulse width limited by junction temperature.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential
or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typical” must be validated for each customer
application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products
are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal
injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall
indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an
Equal Opportunity/Affirmative Action Employer.
PRELIMINARY
2
Publication Order Number:
DS-AM1431_A