AM1340N Datasheet, PDF (2/3 Pages) Analog Power – N-Channel 40V (D-S) MOSFET

Analog Power
AM1340N
SPECIFICATIONS (T_A = 25^oC UNLESS OTHERWISE NOTED)
Parameter
Symbol
Test Conditions
Static
Min
Limits
Typ Max
Unit
Gate-Threshold Voltage
Gate-Body Leakage
Zero Gate Voltage Drain Current
On-State Drain Current^A
Drain-Source On-Resistance^A
Forward Tranconductance^A
Diode Forward Voltage
Dynamic^b
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall-Time
V_GS(th)
I_GSS
I_DSS
I_D(on)
r_DS(on)
g_fs
V_SD
V_DS = V_GS, I_D = 250 uA
V_DS = 0 V, V_GS = ±20 V
V_DS = 32 V, V_GS = 0 V
V_DS = 32 V, V_GS = 0 V, T_J = 55^oC
V_DS = 5 V, V_GS = 10 V
V_GS = 10 V, I_D = 1.7 A
V_GS = 4.5 V, I_D = 1.4 A
V_DS = 10 V, I_D = 1.7 A
I_S = 1.6 A, V_GS = 0 V
1
V
±100 nA
1
uA
10
10
A
86
mΩ
128
11.3
S
0.75
V
Q_g
7.5
Q_gs
V_DS = 10 V, V_GS = 5 V, I_D = 1.7 A
0.6
nC
Q_gd
1.0
t_d(on)
8
t_r
V_DD = 10 V, R_L = 15 Ω, I_D = 1 A,
24
ns
t_d(off)
V_GEN = 4.5 V
35
t_f
10
Notes
a. Pulse test: PW <= 300us duty cycle <= 2%.
b. Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and
actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur.
Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer.
PRELIMINARY
2
Publication Order Number:
DS-AM1340_A