AAT1141_08 Datasheet, PDF (9/21 Pages) Advanced Analogic Technologies – Fast Transient 600mA Step-Down Converter

SwitchReg^TM
Functional Block Diagram
PRODUCT DATASHEET
AAT1141
Fast Transient 600mA Step-Down Converter
OUT
IN
See note
Err
Am. p
Voltage
Reference
EN
INPUT
DH
Logic
DL
LX
GND
Note: For adjustable version, the internal feedback divider is omitted and the OUT pin is tied directly
to the internal error amplifier.
Functional Description
The AAT1141 is a high performance 600mA 2MHz mono-
lithic step-down converter. It has been designed with the
goal of minimizing external component size and optimiz-
ing efficiency over the complete load range. Apart from
the small bypass input capacitor, only a small L-C filter
is required at the output. Typically, a 4.7μH inductor and
a 4.7μF ceramic capacitor are recommended (see table
of values).
The fixed output version requires only three external
power components (C_IN, C_OUT, and L). The adjustable ver-
sion can be programmed with external feedback to any
voltage, ranging from 0.6V to the input voltage. An addi-
tional feed-forward capacitor can also be added to the
external feedback to provide improved transient response
(see Figure 1).
At dropout, the converter duty cycle increases to 100%
and the output voltage tracks the input voltage minus
the R_DS(ON) drop of the P-channel high-side MOSFET.
The input voltage range is 2.7V to 5.5V. The converter
efficiency has been optimized for all load conditions,
ranging from no load to 600mA.
The internal error amplifier and compensation provides
excellent transient response, load, and line regulation.
Soft start eliminates any output voltage overshoot when
the enable or the input voltage is applied.
1141.2008.07.1.4
www.analogictech.com
9