AAT3526 Datasheet, PDF (6/10 Pages) Advanced Analogic Technologies – MicroPower Supervisory Circuit with Manual Reset

AAT3526/7/8
MicroPower Supervisory Circuit with Manual Reset
Functional Block Diagram
MR
V_CC
VREF
Reset
Generator
+ Timer
RESET
(RESET)
Oscillator
GND
Functional Description
General
During start-up, the reset pin on a microprocessor
ensures that it is fully reset and starts up in a known
condition. The AAT3526/7/8 series of microproces-
sor reset devices monitor the supply voltage to a
microprocessor and assert a reset signal whenever
the V_CC voltage falls below a factory programmed
threshold. This threshold is accurate within +/-1.5%
at 25ºC and within +/- 2.5% over the entire operat-
ing temperature range. The reset signal remains
asserted for a minimum of 150ms after V_CC has
risen above the threshold as shown in Figure 1.
V_CC
V_TH
V_TH
t_RDY
Figure 1: Reset Timing Diagram
6
V_TH
t_RDY
3526.2002.1.0.62