AAT3192 Datasheet, PDF (3/17 Pages) Advanced Analogic Technologies – Low-Cost, 2-/3-Channel Charge-Pump LED Drivers

Part Number Descriptions
Part Number
AAT3192IJQ-1
AAT3192IJQ-2
AAT3192IJQ-3
AAT3192IJQ-4
AAT3193IJQ-1
AAT3193IJQ-2
AAT3193IJQ-3
AAT3193IJQ-4
Interface
S²Cwire
S²Cwire
S²Cwire
PWM
S²Cwire
S²Cwire
S²Cwire
PWM
AAT3192/93
Low-Cost, 2-/3-Channel
Charge-Pump LED Drivers
Current Control,
Inverting
16-step
8-step
4-step
Linear
16-step
8-step
4-step
Linear
Absolute Maximum Ratings¹
Symbol
Description
IN, C+, C-, OUT, D1, D2, D3, and RSET Pin Voltages to GND
EN/SET or EN/PWM Pin Voltage to GND
Operating Junction Temperature Range
Maximum Soldering Temperature (at leads, 10 sec)
Value
-0.3 to 6.0
-0.3 to V_IN + 0.3
-40 to 150
300
Units
V
V
°C
°C
Thermal Information
Symbol
P_D
θ_JA
Description
Maximum Power Dissipation^{2, 3}
Maximum Thermal Resistance²
Value
625
160
Units
mW
°C/W
1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at condi-
tions other than the operating conditions specified is not implied. Only one Absolute Maximum Rating should be applied at any one time.
2. Mounted on an FR4 circuit board.
3. Derate 6.25mW/°C above 40°C ambient temperature.
3193.2007.05.1.0
3