AAT3526_06 Datasheet, PDF(2/9 Page) Advanced Analogic Technologies – MicroPower™ Supervisory Circuit with Manual Reset

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

AAT3526_06 Datasheet, PDF (2/9 Pages) Advanced Analogic Technologies – MicroPower™ Supervisory Circuit with Manual Reset

◁

AAT3526/7/8

MicroPowerâ¢ Supervisory Circuit

with Manual Reset

Pin Descriptions

AAT3526, 3527, 3528 (SOT143)

Pin #

Symbol

GND

RESET

(AAT3527)

RESET

(AAT3526,

AAT3528)

VCC

Function

Ground connection.

RESET output remains high while VCC is below the reset threshold

and remains so for a minimum of 150ms after VCC raises above the

reset threshold.

RESET output remains low while VCC is below the reset threshold

and remains so for a minimum of 150ms after VCC raises above the

reset threshold.

Manual reset active low input. A logic low signal on MR asserts a

reset condition. Asserted reset continues as long as MR is low and

for a minimum of 150ms after MR returns high.

Supply voltage (+1.2V to +5.5V). Due to extremely low operating

current, it is recommended to place a 10nF capacitor between VCC

and GND.

Part Number Descriptions

Part Number

AAT3526

AAT3527

AAT3528

Output Type

Reset Output Push Pull Active Low with Delay

Reset Output Push Pull Active High with Delay

Reset Output Open Drain Active Low with Delay

Pin Configuration

SOT143

(Top View)

GND 1

4 VCC

(RESET) RESET 2

3 MR

3526.2006.03.1.6

▷