AAT3683_08 Datasheet, PDF (1/23 Pages) Advanced Analogic Technologies – 1A Linear Li-Ion Battery Charger

BatteryManager^TM
General Description
The AAT3683 BatteryManager is a highly integrated sin-
gle-cell lithium-ion / polymer (Li-Ion) battery charger
that operates from a USB port or an AC adapter input up
to an input voltage of 7.5V.
The AAT3683 precisely regulates battery charge voltage
and current for 4.2V Li-Ion battery cells. The battery
charging current can be set by an external resistor up to
1A.
Digital Thermal Loop Control maintains the maximum
possible battery charging current for the given set of
input to output power dissipation and ambient tempera-
ture conditions.
Battery charge state is continuously monitored for fault
conditions. In the event of an over-current, over-voltage,
short-circuit, or over-temperature condition, the device
will shut down automatically, thus protecting the charg-
ing device, control system, and the battery under
charge. A status monitor output pin is provided to indi-
cate the battery charge status by directly driving an
external LED. An open-drain power source detection out-
put is provided to report the power supply status.
The AAT3683 is available in the Pb-free, thermally-
enhanced, space-saving 2.2x2.2mm 10-pin STDFN
(AAT3683-2 and -3) and 16-pin QFN33 (AAT3683-4)
packages and is specified for operation over the
-40°C to +85°C temperature range.
Typical Application
ENABLE
VIN
CIN
CT
EN
IN
BAT
TERM
AAT3683-2
STAT
ADPP#
CT
GND
TS
ISET
RTERM
RSET
BATT+
CBAT
BATT-
TEMP
Battery
Pack
PRODUCT DATASHEET
AAT3683
1A Linear Li-Ion Battery Charger
Features
• USB or AC Adapter Input
• Programmable from 100mA to 1A
• 4.0V to 7.5V Input Voltage Range
• High Level of Integration with Internal:
▪ Charging Device
▪ Reverse Blocking Diode
▪ Current Sensing
• Digital Thermal Regulation
• Charge Current Programming (ISET)
• Charge Termination Current Programming (TERM)
• Charge Timer (CT)
• Battery Temperature Sensing (TS)
• TS Pin Open Detection
• Automatic Recharge Sequencing
• Automatic Trickle Charge for Battery Pre-Conditioning
(no trickle charge option available)
• Full Battery Charge Auto Turn-Off / Sleep Mode /
Charge Termination
• 1μA Max. Shutdown Current
• Over-Voltage and Over-Current Protection
• Emergency Thermal Protection
• Power On Reset and Soft Start
• 2.2x2.2mm STDFN-10 (AAT3863-2 and -3) and
QFN33-16 (AAT3683-4) Packages
Applications
• Bluetooth Headsets, Headphones, Accessories
• Cellular Phones
• Digital Still Cameras
• MP3, Portable Music, and Portable Media Players
• Personal Data Assistants (PDAs) and Handheld
Computers
• Other Li-Ion Battery-Powered Devices
ENABLE
VIN
CIN
CT
EN
IN
BAT
TERM
AAT3683-4
STAT 1
STAT 2
CT
GND
TS
ISET
RT
RTERM
RSET
BATT+
CBAT
BATT-
TEMP
Battery
Pack
3683.2007.11.1.2
www.analogictech.com
1