AWC6325 Datasheet, PDF (9/11 Pages) ANADIGICS, Inc – HELP3E Dual-band Cellular & PCS CDMA 3.4 V Linear Power Amplifier Module

AWC6325
PCB BOARD Design GuidELINES
Refer to Figure 7 for the recommended PCB metal
design, soldermask design, and stencil print patterns
when assembling with ANADIGICS modules.
It is important to note that the PCB metal design is
dependent upon several factors: the electrical and
thermal performance requirements of the product,
and the PCB-to-device interconnect pattern. The
PCB metal design recommendations primarily deal
with the PCB-to-device interconnection. Specific
board-level electrical and thermal performance re-
quirements will be dictated by the physical geometry
of the specific application and are the responsibility
of the end product manufacturer.
Figure 7: PCB Board Design Guidelines
9
PRELIMINARY DATA SHEET - Rev 1.3
05/2012