ARA2005 Datasheet, PDF (4/16 Pages) ANADIGICS, Inc – Reverse Amplifier with Step Attenuator

ARA2005
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Analog Supply (pins 2, 4, 11, 20, 23)
0
9
VDC
Amplifier Controls Vg1, Vg2 (pins 7, 22)
-5
2
V
RF Power at Inputs (pins 6, 9)
-
+60 dBmV
Attenuator Controls (pins 13, 14, 15, 16)
0
6
V
Storage Temperature
-55 +200
0_C
Soldering Temperature
-
260
0_C
Soldering Time
-
5
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure to
absolute ratings for extended periods of time may adversely affect
reliability.
Notes:
1. Pins 3, 6, 9, 12, 17, 18, 25 and 26 should be AC-coupled. No external DC
bias should be applied.
2. Pins 8 and 21 should be grounded or pulled to ground through a resistor. No
external DC bias should be applied.
PARAMETER
Table 3: Operating Ranges
MIN
TYP
MAX
UNIT
Amplifier Supply: VDD (pins 4, 11, 20, 23)
4.5
5
7
VDC
Attenuator Supply: VATTN (pin 2)
VDD-0.5
5
7
VDC
Attenuator Controls (pins 13, 14, 15, 16)
0
-
VDD+0.5
V
Amplifier Controls Vg1, Vg2 (pins 7, 22)
-5
1
2
V
Case Temperature
-40
25
85
0_C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical specifications.
4
PRELIMINARY DATA SHEET - Rev 1.3
08/2001