ARA2004 Datasheet, PDF (4/20 Pages) ANADIGICS, Inc – Reverse Amplifier with Step Attenuator

ARA2004
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Analog Supply (pins 2, 4, 9, 21, 24)
0
9
VDC
Digital Supply: VCMOS (pin 11)
0
6
VDC
Amplifier Controls Vg1, Vg2 (pins 6, 23)
-5
2
V
RF Power at Inputs (pins 5, 8)
-
+60
dBmV
Digital Interface (pins 12, 13, 14)
-0.5
VCMOS+0.5
V
Storage Temperature
-55
+200
0_C
Soldering Temperature
-
260
0_C
Soldering Time
-
5
Sec
Stresses in excess of the absolute ratings may cause permanent damage. Functional
operation is not implied under these conditions. Exposure to absolute ratings for
extended periods of time may adversely affect reliability.
Notes:
1. Pins 3, 5, 8, 10, 19, 20, 25 and 26 should be AC-coupled. No external DC bias should be
applied.
2. Pins 7 and 22 should be grounded or pulled to ground through a resistor. No external DC
bias should be applied.
PARAMETER
Table 3: Operating Ranges
MIN
TYP
MAX
UNIT
Amplifier Supply: VDD (pins 4, 9, 21, 24)
4.5
5
Attenuator Supply: VATTN (pin 2)
VDD-0.5
5
Digital Supply: VCMOS (pin 11)
3.0
-
Digital Interface
0
-
Amplifier Controls Vg1, Vg2 (pins 6, 23)
-5
1
7
7
5.5
VCMOS
2
VDC
VDC
VDC
V
V
Case Temperature
-40
25
85
0_C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical specifications.
4
Data Sheet - Rev 2.1
07/2005