ARA05050 Datasheet, PDF (4/16 Pages) ANADIGICS, Inc – Reverse Amplifier with Step Attenuator

ARA05050
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Analog Supply: VSUP (pins 4, 12, 18)
0
9
VDC
Amplifier Reference Voltages (pins 5, 19)
-2.5
VSUP
2
VDC
RF Power at Amplifier Inputs (pins 10, 24)
-
+60
dBmV
Attenuator Controls (pins 13, 14, 15, 16)
0
6
V
Storage Temperature
-55
+200
o_C
Soldering Temperature
-
260
o_C
Soldering Time
-
5
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure to
absolute ratings for extended periods of time may adversely affect reliability.
Notes:
1. Pins 3 and 26 should be AC-coupled. No external DC bias should be applied.
2. Pins 10, 11, 24 and 25 should be grounded or pulled to ground through a resistor.
No external DC bias should be applied.
3. Pins 6, 7, 8, 9, 20, 21, 22 and 23 should be AC-grounded. No external DC bias
should be applied.
PARAMETER
Table 3: Operating Ranges
MIN
TYP
MAX
UNIT
Amplifier Supply: VDD (pins 4, 18)
4.5
5
Attenuator Supply: VATTN (pin 12)
VDD-0.5
5
Attenuator Controls (pins 13, 14, 15, 16)
0
-
7
VDC
7
VDC
5.5
V
Amplifier Reference Voltages (pins 5, 19)
-
1.75
-
VDC
Case Temperature
-40
25
85
o_C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical specifications.
4
Data Sheet - Rev 2.2
05/2005