ACA2407_11 Datasheet, PDF (4/13 Pages) ANADIGICS, Inc – 750/870/1000 MHz CATV Power Doubler Line Amplifier

ACA2407
Table 4: AC and DC Electrical Specifications
(Ta = +25 °C, Vdd = +24 VDC)
PARAMETER
MIN TYP MAX UNIT COMMENTS
Gain @ 1000 MHz ⁽¹⁾
20.8 21.3 22.1
dB
Cable Equivalent Slope ⁽¹⁾
-
0
-
dB
Gain Flatness ⁽¹⁾ @ 1000 MHz
-
0.2
-
dB
Noise Figure ⁽¹⁾
-
4.0
4.5
dB
CTB ⁽¹⁾
77 Channels ⁽²⁾
-
79 Channels plus QAM to 1 GHz ^{(4), (6)}
-
110 Channels ⁽³⁾
-
112 Channels plus QAM to 1 GHz ^{(5), (6)}
-
CSO ⁽¹⁾
77 Channels ⁽²⁾
-
79 Channels plus QAM to 1 GHz ^{(4), (6)}
-
110 Channels ⁽³⁾
-
112 Channels plus QAM to 1 GHz ^{(5), (6)}
-
XMOD ⁽¹⁾
77 Channels ⁽²⁾
-
79 Channels plus QAM to 1 GHz ^{(4), (6)}
-
110 Channels ⁽³⁾
-
112 Channels plus QAM to 1 GHz ^{(5), (6)}
-
Return Loss (Input/Output) ⁽¹⁾
19
-76
-74
-
-80
-71
-
-
-75
-71 -69
-
-72
-66
-
-
-67
-66
-64
-
-70
-66
-
-
-70
22
-
dBc
dBc
dBc
dB 75  system
Supply Current
415 425 435
mA
Thermal Resistance
-
-
3.8
o_C/W
Notes:
(1) Measured with baluns on the input and output of the device.
(2) Parts measured with 77 channels, +56 dBmV power, 13.5 dB tilt at 870 MHz.
(3) Parts measured with 110 channels, +52 dBmV power, 13.5 dB tilt at 870 MHz.
(4) 79 analog channels plus QAM, +55 dBmV, 15.6 dB tilt at 1 GHz.
(5) 112 analog channels plus QAM, +51 dBmV, 15.6 dB tilt at 1 GHz.
(6) QAM is set 6 dB below analog carrier.
7. All specifications as measured on Evaluation Board (see Figures 13 & 14).
4
Data Sheet - Rev 2.4
04/2011