CHP2299 Datasheet, PDF (3/20 Pages) ANADIGICS, Inc – WCDMA InGaP HBT Amplifier Module

ELECTRICAL CHARACTERISTICS
CHP2299
PARAMETER
Table 2: Absolute Minimum and Maximum Ratings
MIN MAX UNIT
COMMENTS
RF Input Power (PIN)
-
10
dBm
Supply Voltage (VCC)
-
6
V
Reference Voltage (VREF)
-
3.4
V
Mode Control Voltage(VMODE)
-
3.4
V
Case Operating Temperature (TC)
-25
100
°C
Storage Temperature (TSTG)
- 55 125
°C
Soldering Temperature (TS)
-
240
°C
5 seconds
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation
is not implied under these conditions. Exposure to absolute ratings for extended periods of
time may adversely affect reliability.
PARAMETER
Table 3: Operating Ranges (with NO AGC)
MIN TYP MAX UNIT
COMMENTS
Operating Frequency (f)
1920
-
1980 MHz
Supply Voltage (VCC)
+1.8 +3.4 +4.2
V
Reference Voltage (VREF)
+2.8 +2.85 +2.9
V
Mode Control Voltage (VMODE)
+2.1 +2.85 +3.0
V
with NO AGC option
Operating Temperature (TC)
-25 +25 +85
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed
only over the conditions defined in the electrical specifications.
Notes:
1. In NO AGC option, VMODE can simply be tied to VREF.
PRELIMINARY DATA SHEET - Rev 1.2
3
02/2004