ARA2017 Datasheet, PDF (3/15 Pages) ANADIGICS, Inc – Programmable Gain Amplifier

ELECTRICAL CHARACTERISTICS
ARA2017
PARAMETER
Table 2: Absolute Minimum and Maximum Ratings
MIN
MAX
uNIT
coMMENTS
Supply: VDD (pins 5, 14, 19, 21, 28),
VATTN (pin 25)
0
+6
V
RF Power at Inputs (pins 1, 3)
-
+40
dBmV differential into 200 V
Digital Interface (pins 9, 10, 11, 13)
-0.5
VDD+0.5
V
Storage Temperature
-55
+150
°C
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under
these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PARAMETER
Table 3: Operating Ranges
MIN
TYP
MAX
uNIT
Operating Frequency (f)
5
-
85
MHz
Supply: VDD (pins 5, 14, 19, 21, 28)
+4.5
+5
+5.5
V
Digital Interface (pins 9, 10, 11, 13)
0
-
VDD
V
Case Temperature (TC)
-20
+25
+85
°C
The device may be operated safely over these conditions; however, parametric performance is
guaranteed only over the conditions defined in the electrical specifications.
Table 4: Digital Interface Specifications
(VDD = +5.0 V)
PARAMETER
MIN
TYP
MAX
uNIT
Logic High Input Voltage: VIN,HIGH
+2.0
-
VDD
V
Logic Low Input Voltage: VIN,LOW
0
-
+0.8
V
Note:
1. Logic control levels apply to the 3-wire programming bus (pins 9, 10, 11) and the transmit
enable control (pin 13).
PRELIMINARY DATA SHEET - Rev 1.0
3
07/2008