ALT6701 Datasheet, PDF (3/12 Pages) ANADIGICS, Inc – HELP4 UMTS2100 (Band 1) LTE, WCDMA, CDMA Multimode PAM

ALT6701
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply Voltage (VCC)
0
+5
V
Battery Voltage (VBATT)
0
+6
V
Control Voltages (VMODE1, VMODE2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
Storage Temperature (TSTG)
-40 +150
°C
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
PARAMETER
Table 3: Operating Ranges
MIN TYP MAX UNIT
COMMENTS
Operating Frequency (f)
1920
-
1980 MHz
Supply Voltage (VCC)
+3.1 +3.4 +4.35
V
POUT < +28.4 dBm
Enable Voltage (VEN)
+1.35
0
+1.8
-
+3.1
+0.5
V
PA "on"
PA "shut down"
Mode Control Voltage (VMODE1,VMODE2)
+1.35
0
+1.8
-
+3.1
+0.5
V
Low Bias Mode
High Bias Mode
WCDMA / UMTS Output Power ^{(1, 3)}
R99, HPM
27.6 28.4
-
HSPA (MPR=0), HPM
26.6 27.4
-
LTE⁽²⁾
26.2 27.0
-
R99, MPM
-
17.0
-
LTE⁽²⁾ & HSPA (MPR=0), MPM
-
16.0
-
R99, LPM
8.2
9.0
-
LTE⁽²⁾ & HSPA (MPR=0), LPM
7.2
8.0
-
CDMA Output Power ^{(1, 3)}
HPM
MPM
LPM
26.9 27.7
-
-
16.0
-
7.2
8.0
-
dBm
3GPP TS 34.121-1, Rel 8
Table C.11.1.3 for WCDMA
SUBTEST 1
TS 36.101 Rel 8 for LTE
dBm CDMA 2000, RC-1
Case Temperature (TC)
-40
-
+90
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only over
the conditions defined in the electrical specifications.
Notes:
(1) For Operation at 3.1 V, POUT is derated by 0.8 dB.
(2) LTE Waveform: Up to 20 MHz, 18 RB’s, QPSK.
(3) For Operation at +105 °C, POUT is derated by 1.0 dB.
3
Data Sheet - Rev 2.8
03/2012