ACA2420 Datasheet, PDF (3/10 Pages) ANADIGICS, Inc – 24V, 1000 MHz, 21.5dB Gain High Output Power Doubler Line Amplifier

ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply (pins 12, 13)
0
+28
VDC
Current Adjust (pin 6)
0
+4
VDC
RF Power at Inputs (pins 4, 5)
-
+75
dBmV
Storage Temperature
-65
+150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Notes:
1. Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be
applied.
2. Pin 6 should be AC-grounded and/or pulled to ground through a resistor for
current control.
3. Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external DC
bias should be applied.
4. Pins 10 and 15 receive DC bias directly from pins 11 and 14.
ACA2420
PARAMETER
Table 3: Operating Ranges
MIN TYP
MAX
UNIT
Supply: VDD (pins 12, 13)
-
+24
-
VDC
Current Adjust (pin 6)
-
+1.5
-
VDC
RF Frequency
40
-
1000 MHz
Case Temperature
-40
-
+110
°C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
ADVANCED PRODUCT INFORMATION - Rev 0.1
3
07/2008