ACA1206 Datasheet, PDF (3/16 Pages) ANADIGICS, Inc – 1 GHz CATV Line Amplifier

ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Amplifier Supplies (pins 10, 11, 14, 15)
0
+15
VDC
RF Input Power (pins 3, 6)
-
+70 dBmV
Storage Temperature
-65 +150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
sec
Stresses in excess of the absolute ratings may cause permanent
damage. Functional operation is not implied under these conditions.
Exposure to absolute ratings for extended periods of time may
adversely affect reliability.
Notes:
1. Pins 3 and 6 should be AC-coupled. No external DC bias should be
applied.
2. Pin 7 should be pulled to ground through resistor R1, as shown in Figure 3.
No external DC bias should be applied.
ACA1206
Table 3: Operating Ranges
PARAMETER
MIN TYP MAX UNIT
RF Frequency
40
-
1000 MHz
Supply: V_DD (pins 10, 11, 14, 15)
Operating Temperature
-
+12
-
VDC
-40
-
+110 ^OC
The device may be operated safely over these conditions; however,
parametric performance is guaranteed only over the conditions defined in
the electrical specifications.
PRELIMINARY DATA SHEET - Rev 1.0
3
09/2005