ACA0861_08 Datasheet, PDF (3/16 Pages) ANADIGICS, Inc – 750/860 MHz CATV Line Amplifier MMIC

ACA0861 - A, B, C, D
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Amplifier Supplies (pins 10, 11, 14, 15)
0
+15 VDC
RF Input Power (pins 3, 6)
-
+70 dBmV
Storage Temperature
-65 +150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Notes:
1. Pins 3 and 6 should be AC-coupled. No external DC bias should be
applied.
2. Pin 7 should be pulled to ground through a resistor or left open-circuited. No
external DC bias should be applied.
PARAMETER
Table 3: Operating Ranges
MIN TYP
MAX
UNIT
RF Frequency
40
-
860
MHz
Supply: VD (pins 10, 11, 14, 15)
-
+12
-
VDC
Operating Temperature: TA
-40
-
+110
°C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Data Sheet - Rev 2.3
3
09/2008