PD100 Datasheet, PDF (2/2 Pages) ANADIGICS, Inc – 100μm InGaAs Photodiode

PD100
Table 2: Absolute Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Forward Current
-
5
mA
Reverse Current
-
500
μA
Reverse Voltage
-
30
V
Optical input power
-
5
mW
Operating Case Temperature
-40
+85
ºC
Storage Temperature
-40
+85
ºC
Soldering temperature (10 seconds)
-
+250
ºC
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied
under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PACKAGE DIMENSIONS – PD100-003-100 and PD100-003-105
ORDERING INFORMATION
Part Number
PD100-003-100
PD100-003-105
Dimensions: INCHES [mm]
Table 3: Standard
Options
TO46, 3pin, non AR coated, gold plated lens cap
TO46, 3pin, non AR coated, gold plated flat window cap
Table 4: Custom
Part Number
Options
PD100-003-0xx
Custom defined size and electrical layout.
PD100-003-1xx
Package: TO46, TO56, 2 or 3 pin.
Cap: Window or lens. AR or Non-AR coated. Gold or nickel plated.
Pigtailed: TO46, 2 or 3 pin. Fiber length, 0.5 meter, 1.0 meter
PD100-003-3xx
Fiber type: Multimode, single mode (SMF-28) or custom supplied
Connector Type: SC, ST or FC. APC or UPC
PD100-003-5xx
Receptacle, 2 or 3 pin. SC, ST or FC aligned
Please contact Anadigics for the specific part number and pinout that suits your needs
ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A.
Tel: [phone]
Fax: [phone]
URL: http://www.anadigics.com
E-mail: [e-mail]
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any
time without notice. The product specifications contained in Advanced Product Information sheets and
Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in
Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS
assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of
an ANADIGICS product in any such application without written consent is prohibited.
Rev 1.0
2