ACA2402_08 Datasheet, PDF (10/13 Pages) ANADIGICS, Inc – 750/870/1000 MHz CATV Push-Pull Line Amplifier

ACA2402
APPLICATION INFORMATION
Figure 16: Evaluation Board Layout
Notes:
1. Via holes should be 35 mils (0.89 mm) in diameter, and plated to 1 mil (0.025 mm) thickness. They need not be solder-
filled.
2. WARNING: Due to the power dissipation of this device, the printed circuit board should be mounted/attached
to a heat sink.
3. More assembly details, such as via hole diameters, via spacing, solder paste application, and soldering recommenda-
tions are provided in the application note entitled, “Thermal Management of ANADIGICS’ Surface Mounted Amplifiers”.
Figure 17: Evaluation Board Schematic
10
Data Sheet - Rev 2.2
12/2008