RFSP2020 Datasheet, PDF (1/4 Pages) ANADIGICS, Inc – 2.4-2.5 GHz Power Amplifier

Preliminary
RFSP2020
2.4–2.5 GHz Power Amplifier
Applications
• 802.11b/g WLAN
• 2.4 GHz ISM band wireless equipment
16
15
14
13
RF IN 1
GND
2
Input
Match
12 GND
Output
Match
11 RF OUT
VPC1 3
VPC2/3 4
Bias
Bias
Detector
10 GND
9 NC
5
6
7
8
Functional Block Diagram
Product Description
The RFSP2020 power amplifier is a high-
performance GaAs HBT IC designed for use in
transmit applications in the 2.4-2.5 GHz frequency
band. With a P1dB of 25 dBm, the device is ideal
as a final stage for wireless LAN applications
requiring high transmit linearity. Designed with
advanced linearizing techniques, the device
achieves a specific error vector magnitude (EVM)
with lesser backoff than conventional PA designs.
The PA exhibits unparalleled linearity and
efficiency for both 802.11b- and 802.11g-based
WLAN systems. The on-chip detector is perfect
for systems where power sensing is necessary.
The part operates off a single +3.3V supply.
Product Features
• _{25 dBm P1dB@3.3V}
• _{30 dB gain}
• 1.5 % EVM @ P_OUT = +18 dBm
with 54 Mbps OFDM signal
• 110 mA @ P_OUT = +18 dBm
with 54 Mbps OFDM signal
• Single +3.3V supply voltage
• PA power on/off logic
• Input and output matched to 50 ohms
3.00
Index Area
Top View
1.00
0.80
4
0.275
0.225
Pin 1
1. All dimensions are in millimeters, angles in
16
degrees.
0.45
0.35
1
2. The terminal #1 identifier and pad
numbering convention shall conform to
JESD 95-1 SPP-012
3.00
0.50 TYP
3. Lead coplanarity: 0.05 max.
1.50
0.05
1.80 SQ
4. Dimension applies to metalized pad and is
measured between 0.25 and 0.30 MM from
pad tip.
Side View
Bottom View
3x3 mm Package Outline
05/2003