|
AWT6280 Datasheet, PDF (1/16 Pages) ANADIGICS, Inc – Quad-band GSM/GPRS/Polar EDGE Power Amplifier Module with Integrated Power Control | |||
|
features
⢠Internal Reference Voltage
⢠Integrated Power Control
⢠InGaP HBT Technology
⢠ESD Protection on All Pins (2.5 kV)
⢠Low profile 1.0 mm
⢠Small Package Outline 7 mm x 7 mm
⢠EGPRS Capable (class 12)
⢠RoHS Compliant Package, 250 oC MSL-3
GMSK MODE
⢠+35 dBm GSM850/900 Output Power
⢠+33 dBm DCS/PCS Output Power
⢠55 % GSM850/900 PAE
⢠52 % DCS/PCS PAE
⢠Power control range > 50 dB
EDGE MODE
⢠+29 dBm GSM850/900 Output Power
⢠+28.5 dBm DCS/PCS Output Power
⢠29 % GSM850/900 PAE
⢠30 % DCS/PCS PAE
⢠-64 dBc Typical ACPR (400 kHz)
⢠-74 dBc Typical ACPR (600 kHz)
AWT6280
Quad-band GSM/GPRS/Polar EDGE
Power Amplifier Module
with Integrated Power Control
Data Sheet - Rev 2.1
AWT6280R
M11 Package
18 Pin 7 mm x 7 mm x 1.0 mm
Surface Mount Module
APPLICATIONS
⢠Dual/Tri/Quad Band Handsets, PDAs, and
Data Devices
PThRisOpDoUwCerTaDmEpSlifiCerRmIPoTdIuOleNââ supports dual, tri and
quad band applications for GMSK and 8-PSK modu-
lation schemes using an open loop polar architec-
ture. There are two amplifier chains, one to support
GSM850/900 bands, the other for DCS/PCS bands.
Each amplification chain is optimized for excellent
EDGE efficiency, power, and linearity in a Polar loop
environment while maintaining high efficiency in the
GSM/GPRS mode.
The module includes an internal reference voltage
and integrated power control scheme for use in both
GMSK and 8-PSK operation. This facilitates fast and
easy production calibration and reduces the number
of external components required to complete a power
control function.
The amplifierâs power control range is typically 55 dB,
with the output power set by applying an analog volt-
age to VRAMP. All of the RF ports for this device are DC
blocked and internally matched to 50 ï.
DCS/PCS_IN
DCS/PCS
DCS/PCS_OUT
BS
TX_EN
VBATT
CEXT
VRAMP
Bias/Power
Control
GSM850/900_IN
GSM850/900
GSM850/900_OUT
Figure 1: Block Diagram
11/2008
|
▷ |