|
AWT6272 Datasheet, PDF (1/8 Pages) ANADIGICS, Inc – HELPTM Cellular/WCDMA 3.4 V/29 dBm Linear Power Amplifier Module | |||
|
FEATURES
⢠InGaP HBT Technology
⢠High Efficiency:
44 % @ POUT = +29 dBm
20 % @ POUT = +16 dBm
15 % @ POUT = +7 dBm
⢠Low Quiescent Current: 16 mA
⢠Low Leakage Current in Shutdown Mode: <1 µA
⢠VREF = +2.85 V (+2.75 V min over temp)
⢠Optimized for a 50 ⦠System
⢠Low Profile Miniature Surface Mount Package
⢠RoHS Compliant Package, 250 oC MSL-3
⢠HSPA Compliant (no backoff)
APPLICATIONS
⢠WCDMA/HSPA Cell-Band Wireless Handsets and
Data Devices
PRODUCT DESCRIPTION
The AWT6272 meets the increasing demands for
higher output power in UMTS handsets. The PA
module is optimized for VREF = +2.85 V, a requirement for
compatibility with the Qualcomm® 6250 chipset. The
device is manufactured on an advanced InGaP HBT
AWT6272
HELPTM Cellular/WCDMA 3.4 V/29 dBm
Linear Power Amplifier Module
Data Sheet - Rev 2.1
AWT6272R
M20 Package
10 Pin 4 mm x 4 mm x 1 mm
Surface Mount Module
MMIC technology offering state-of-the-art reliability,
temperature stability, and ruggedness. Selectable
bias modes that optimize efficiency for different output
power levels, and a shutdown mode with low leakage
current, increase handset talk and standby-time. The
self-contained 4 mm x 4 mm x 1 mm surface mount
package incorporates matching networks optimized for
output power, efficiency, and linearity in a 50 ⦠system.
GND at slug (pad)
VREF 1
10 GND
VMODE 2
Bias Control
9 GND
GND 3
8 RFOUT
RFIN 4
7 GND
VCC 5
6 VCC
Figure 1: Block Diagram
11/2008
|
▷ |