|
AWT6224R Datasheet, PDF (1/8 Pages) ANADIGICS, Inc – HELP3TM Dual-band 900 MHz/IMT UMTS 3.4 V HSPA Linear Power Amplifier Module | |||
|
FEATURES
⢠InGaP HBT Technology
⢠High Efficiency:
20 % @ +16 dBm POUT
(without DC/DC Converter)
40 % @ maximum POUT
⢠Low Quiescent Current: 8 mA
⢠Internal Voltage Regulation
⢠Common VMODE Control Line
⢠Simplified VCC Bus PCB routing
⢠Reduced External Component Count
⢠Low Profile Surface Mount Package: 1 mm
⢠HSDPA Compliant
⢠RoHS Compliant Package, 250 oC MSL-3
APPLICATIONS
⢠WCDMA/HSPA 900/IMT Dual-Band Wireless
Handsets and Data Devices
PRODUCT DESCRIPTION
The AWT6224 addresses the demand for increased
integration in dual-band handsets for EGSM network
deployments. The small footprint 3 mm x 5 mm
x 1 mm surface mount RoHS compliant package
contains independent RF PA paths to ensure optimal
performance in both frequency bands, while achieving
a 25% PCB space savings compared with solutions
requiring two single-band PAs. The package pinout
was chosen to enable handset manufacturers
to easily route VCC to both power amplifiers and
simplify control with a common VMODE pin. The
device is manufactured on an advanced InGaP HBT
MMIC technology offering state-of-the-art reliability,
temperature stability, and ruggedness. The AWT6224
incorporates ANADIGICSâ HELP3⢠technology to
provide low power consumption without the need for
an external voltage regulator. Two operating modes
provide optimum efficiency at high and medium/low
power output levels, thereby dramatically increasing
handset talk-time and standby-time. Its built-in voltage
regulator eliminates the need for external voltage
regulation and load switches. The 3 mm x 5 mm x 1
mm surface mount package incorporates matching
networks optimized for output power, efficiency and
linearity in a 50 ⦠system.
AWT6224R
HELP3TM Dual-band 900 MHz/IMT UMTS
3.4 V HSPA Linear Power Amplifier Module
Data Sheet - Rev 2.2
AWT6224R
M28 Package
14 Pin 3 mm x 5 mm x 1 mm
Surface Mount Module
VEN_900 1
RFIN_900 2
VMODE1 3
VBATT 4
VMODE2 (N/C) 5
GND at slug (pad)
Bias Control
14 GND
13 RFOUT_900
12 VCC
11 VCCA
10 GND
RFIN_IMT 6
9 GND
VEN_IMT 7
Bias Control
8 RFOUT_IMT
GND
Figure 1: Block Diagram
11/2008
|
▷ |