AWS5516 Datasheet, PDF (1/8 Pages) ANADIGICS, Inc – GaAs IC SPDT Reflective Switch DC-2.0 GHz

FEATURES
• High Linearity (IP3 48 dBm @ 0.9 GHz)
• Low Insertion Loss (0.4 dB @ 0.9 GHz)
• 2.7 V to 6V Operation
• Low DC Power Consumption
• Ultra Miniature SOT-26 Package
• High Isolation
APPLICATIONS
• Transmit/receive switch
• Diversity switching
• Antenna selection
PRODUCT DESCRIPTION
The AWS5516 is a Single Pole Double Throw (SPDT)
GaAs MMIC switch assembled in a SOT-26 plastic
package. The AWS5516 is designed for applications
that require low insertion loss, high isolation, high
linearity, and small size. The switch can be controlled
with positive, negative, or a combination of both
voltages.
AWS5516
GaAs IC
SPDT Reflective Switch DC-2.0 GHz
PRELIMINARY DATA SHEET - Rev 1.2
S14
SOT-26
6 Pin Plastic Package
Table 1: Pin Description
RF_{o u t 1}
(J2)
RF
out2
(J3)
C
3
1
GND 2
3
C₂
6 V1
5
4 V2
Vs
Optional Rs
see Note 3
RF_{i n}
(J1)
C₁
Figure 1: Pin Layout
Pin Function Description
1 RF_{OUT 1} (J2) RF port can be used as an input or as an output.
2
GND
Ground connection. Keep as short as possible.
3 RF_{OUT 2} (J3) RF port can be used as an input or an ouput.
4
V2
Control Voltage 2, Low 0V , High 3V to 5V
5
RF_IN (J1)/Vs
RF common port and bias voltage for positive
control (3V to 5V).
6
V1
Control Voltage 1, Low 0V , High 3V to 5V
Notes:
1. DC blocking capacitors C1,2,3 and optional resistor Rs must be supplied externally.
2. C1,2,3 = 100 pF for operation >500MHz.
3. The use of resistor Rs to the positive voltage supply is optional. It is only required if it is necessary to
independently control the RF ports, such as selecting both ports to be OFF at the same time.
01-03