AWM6430 Datasheet, PDF (1/12 Pages) ANADIGICS, Inc – 3.3-3.6 GHz WiMAX PowerAmplifier Module

AWM6430
3.3-3.6 GHz WiMAX PowerAmplifierModule
PRELIMINARY DATA SHEET- Rev 1.0
FEATURES
• 27 dB Gain
• +24 dBm Linear Output Power
• 2.3 % EVM (OFDM Modulation)
• +5 V to +6 V Supply
• High Efficiency
• Integrated Step Attenuator
• Integrated Output Power Detector
• 50Ω Matched RF Ports
• RoHS Compliant 4.5 mm x 4.5 mm x 1.4 mm
Surface Mount Module
AWM6430
APPLICATIONS
• WiMAX tranceivers that support the IEEE
802.16-2004 and ETSI EN301-021 standards
• Broadband Wireless Applications (BWA)
PRODUCT DESCRIPTION
The ANADIGICS AWM6430 WiMAX Power Amplifier
is a high performance device that delivers
exceptional linearity and efficiency at high levels of
output power. Designed to operate in the 3.5 GHz
band, it supports the IEEE 802.16-2004 and ETSI
EN301-021 wireless standards.
The device requires only a single +5 V to +6 V supply
and a low-current reference input. An integrated
detector can be used to monitor output power, and
an integrated 20 dB step attenuator enables gain
M18 Package
12 Pin 4.5 mm x 4.5 mm x 1.4 mm
Surface Mount Module
control. No external circuits are required for biasing
or RF impedance matching, thus reducing external
component costs and facilitating circuit board
designs.
The AWM6430 is manufactured using advanced
InGaP HBT technology that offers state-of-the-art
reliability, temperature stability and ruggedness. It
is optimized for use in a 50 Ω system, and is offered
in a 4.5 mm x 4.5 mm x 1.4 mm surface mount
module.
Supply
Voltage
Supply
Voltage
RF Input
Step
Attenuator
Bias
Control
Matching
Network
Power
Detector
RF Output
Attenuator
Control
Bias
Voltage
Detector
Ouput
Ground
Figure 1: Functional Block Diagram
01/2006