AWL9232 Datasheet, PDF (1/18 Pages) ANADIGICS, Inc – 802.11b/g/n WLAN PA/LNA/RF Switch 2400 - 2500 MHz

AWL9232
802.11b/g/n WLAN PA/LNA/RF Switch
2400 – 2500 MHz
Preliminary Data Sheet - Rev 1.0
FEATURES
• 2.5% EVM @ POUT = +19 dBm with IEEE 802.11g
64 QAM OFDM at 54 Mbps
• -34 dBr 1st Sidelobe / -56 dBr 2nd Sidelobe ACPR
at +21 dBm with IEEE 802.11b at 1, 2, 5.5, 11
Mbps, Gaussian baseband filtering
• SP3T RF Switch to Enable Bluetooth Path
• Single +3.8 V Supply
• Transmit Path Linear Power of Gain 24 dB
• Receive Path In-Band Gain of 13 dB
• Receive Path Noise Figure of 1.9 dB
• 3 x 3 x 0.55 mm ULPCC Package
• Leadfree and RoHS Compliant
APPLICATIONS
• 802.11b/g WLAN in Consumer Electronics
Products (e.g., cell phones, MP3 players,
cameras, etc.)
• 2.4 GHz Cordless Phone Handsets/Basestations
AWL9232
S35 Package
16 Pin 3 mm x 3 mm x 0.55 mm
Surface Mount ULPCC
PRODUCT DESCRIPTION
The ANADIGICS AWL9232 is a high performance
InGaP HBT power amplifier, low-noise amplifier and
RF switch integrated on a single IC.It is particularly
applicable in consumer electronics products (e.g., cell
phones, MP3 players, cameras, etc.) that integrate
802.11b/g WLAN in the 2.4 - 2.5 GHz band. Matched
to 50  on all RF ports, the part requires only one
choke inductor and one power supply decoupling
cap off-chip.
The AWL9232 is manufactured using advanced InGaP
HBT technology that offers state-of-the-art reliability,
temperature stability and ruggedness.It is provided
in a 3 x 3 x 0.55 mm ULPCC package optimized for
a 50  system.
The antenna port is switched between WLAN transmit,
Bias Network
WLAN receive and Bluetooth paths with a low-loss
single-pole triple-throw RF switch.The transmit path
Rx RF OUT
Output
Match
PA exhibits unparalleled linearity for both IEEE 802.11g
WLAN Rx
Enable
and 802.11b WLAN systems under the toughest signal _BLUETOOTH
Control
configurations within these standards. The WLAN
Enable
Logic
receive path from the antenna port to receiver output
WLAN Tx
Enable
port provides a low noise, high-gain path to the system
Tx RFIN
Input
Output
receiver chain.The AWL9232 is biased by a single
Match
Match
+3.8 V supply and consumes ultra-low current in the
OFF mode.
Bias Network
Antenna
04/2008
Figure 1: Block Diagram and Pinout