ATS477 Datasheet, PDF (1/7 Pages) Anachip Corp – Single Phase Hal Efect Latch

Single Phase Hall Effect Latch
ATC
ATS477
„ Features
„ General Description
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
- High output sinking capability up to 250mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Build-in shunt Zener protection for output driver
- SOP-7L provide FG output pin
- Package: SIP-4L and SOP-7L
„ Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor
„ Ordering Information
ATS477 that integrates Hall sensor with output
drivers is designed for electrical commutation of
brush-less DC motor application. The device
includes on-chip Hall voltage generator for
magnetic sensing, the error amplifier that amplifies
the Hall voltage, a comparator that is to provide
switching hysteresis for noise rejection, the
bi-direction drivers for sinking and driving large
current load, and the frequency generator (FG) that
provides a signal proportional to rotation speed.
Internal bandgap regulator is used to provide
temperature compensated bias for internal circuits
and allows a wide operating supply voltage range.
Built-in protection circuit and output shunt Zener
diodes were applied for protecting output drivers
during operating.
If a magnetic flux density is larger than threshold
Bop, DO is turned to sink and DOB is turned to
drive. The output state is held until a magnetic flux
density reversal falls below Brp causing DO to be
turned to drive and DOB turned to sink.
ATS477 is rated for operation over-temperature
range from -20 ^oC to 85 ^oC and voltage range from
3.5V to 20V. The devices are available in low cost
die forms or rugged SIP-4L and power SOP-7L
packages.
ATS477 X - X X X - X
Wafer Body
Package
Lead
Packing
Blank or
P: SIP-4L L : Lead Free Blank : Tube or Bulk
A~Z : if necessary S: SOP-7L Blank: Normal A : Tape & Reel
to specify
„ Application Circuit
Magnetic
Characteristics
A or B
1
2
3
4
coil
FG
1
7
2
6
coil
3
Vcc
4
5
Vcc
(SIP-4L)
Single-coil brush-less DC Fan
(SOP 7)
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. A5 Apr 15, 2004
1/7