AP393 Datasheet, PDF (1/13 Pages) Anachip Corp – Low Power Low Offset Voltage Dual Comparators

Low Power Low Offset Voltage Dual Comparators
AP393
„ Features
- Wide supply
Voltage range: 2.0V to 36V
Single or dual supplies: ±1.0V to ±18V
- Very low supply current drain (0.4 mA) –
independent of supply voltage
- Low input biasing current: 25 nA
- Low input offset current: ±5 nA
- Maximum offset voltage: ±3 mV
- Input common-mode voltage range includes
ground
- Differential input voltage range equal to the power
supply voltage
- Low output saturation voltage: 250 mV at 4 mA
- Output voltage compatible with TTL, DTL, ECL,
MOS and CMOS logic systems
- 8-pin PDIP and SOP Pb-Free packages
„ Advantages
- High precision comparators
- Reduced V_OS drift over temperature
- Eliminates need for dual supplies
- Allows sensing near ground
- Compatible with all forms of logic
- Power drain suitable for battery operation
„ Pin Assignment
„ General Description
The AP393 consists of two independent precision
voltage comparators with an offset voltage
specification as low as 2.0 mV max for two
comparators which were designed specifically to
operate from a single power supply over a wide
range of voltages. Operation from split power
supplies is also possible and the low power supply
current drain is independent of the magnitude of the
power supply voltage. These comparators also
have a unique characteristic in that the input
common-mode voltage range includes ground,
even though operated from a single power supply
voltage.
Application areas include limit comparators, simple
analog to digital converters; pulse, squarewave and
time delay generators; wide range VCO; MOS clock
timers; multivibrators and high voltage digital logic
gates. The AP393 is designed to directly interface
with TTL and CMOS. When operated from both
plus and minus power supplies, the AP393 will
directly interface with MOS logic where their low
power drain is a distinct advantage over standard
comparators.
(Top View)
OUTPUT 1 ¹
INVERTING INPUT 1 2
NON-INVERTING INPUT 1 3
GND 4
8 V⁺
7 OUTPUT 2
AP393
6 INVERTING INPUT 2
5 NON-INVERTING INPUT 2
SOP-8L/PDIP-8L
„ Pin Descriptions
Pin Name
Pin
No.
OUTPUT 1 1
INVERTING
INPUT 1
2
NON-INVERT
ING INPUT 1
3
GND
4
Description
Channel 1 Output
Channel 1 Negative Input
Channel 1 Positive Input
Ground
Pin Name
Pin
No.
NON-INVERT
ING INPUT 2
5
INVERTING
INPUT 2
6
OUTPUT 2 7
V⁺
8
Description
Channel 2 Positive Input
Channel 2 Negative Input
Channel 2 Output
Vcc
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. 1.0 Sep 7, 2004
1/13