|
AP1625 Datasheet, PDF (1/5 Pages) Anachip Corp – PWM/PFM Dual Mode Step-down DC/DC Controller | |||
|
PWM/PFM Dual Mode Step-down DC/DC Controller
AP1625
 Features
- Input voltage range:2.2V~8Vï¼VOUT typeï¼
- Adjustable versionï¼Â±2.5%ï¼
- Oscillator frequency: 270KHzï¼Â±15%ï¼
- High Efficiency: 92%ï¼typ .ï¼
- Stand-by capability: ISTBï¼3µA.ï¼max .ï¼
- Soft-start time set-up externally type possible
- Output voltage type possibleï¼FBï¼
- Package: SOT23-5
 Applications
â Electronic Information Organizers
â Palmtops
â Cellular and portable phones
â Portable Audio Systems
â Various Multi-function Power Supplies
 General Descriptions
The AP1625 series are multi-functional step-down
DC/DC converters with built-in speed, low ON
resistance drivers. A more than 1A output current is
possible using an externally connected transistor,
coil, diode and capacitor.
Output voltage is set-up by external resistorï¼. ±2.5%
accuracyï¼.
With a 270KHz switching frequency, the size of the
external components can be reduced.
Control switches from PWM to PFM during light
loads with the AP1625ï¼PWM/PFM switchableï¼and
the series is highly efficient from light loads to large
output currents.
In relation to soft-start time external capacitor
regulated types.
During stand-by time ï¼CE pin âLOWâï¼,current
consumption is reduced to less than 0.5µA.
With U.V.L.O internal, the external MOSFET. Will
be forcibly switched off if used below the stipulated
voltage.
 Pin Assignment
 Pin Descriptions
(Top View)
FB
CE
5
4
1
2
3
VOUT
VDD
GND
SOT23-5
Pin No.
1
Pin
Name
Function
V OUT External PMOSFET Connection
2
V DD Power Supply
3
GND Ground
4
CE
Chip Enable
Soft-start capacitor connection
5
FB Feedback pin
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev.1.1 May.27, 2004
1/5
|
▷ |