AM93LC86 Datasheet, PDF (1/12 Pages) Anachip Corp – 16384-bits Serial Electrically Erasable PROM

16384-bits Serial Electrically Erasable PROM
AM93LC86
(Preliminary)
Features
• State-of-the-art architecture
- Non-volatile data storage
- Standard voltage and low voltage operation
Vcc: 2.7V ~ 5.5V
- Full TTL compatible inputs and outputs
- Auto increment read for efficient data dump
• Hardware and software write protection
- Software instructions for write-enable/disable
- VCC level verification before self-timed
programming cycle
• Versatile, easy-to-use interface
- Self-timed programming cycle
- Automatic erase-before-write
- Programming status indicator
- Word and chip erasable
- Stop SK anytime for power savings
• Durability and reliability
- 40 years data retention
- Minimum of 1M write cycles per word
- Unlimited read cycles
- ESD protection
General Description
The AM93LC86 is the 16384-bit non-volatile serial
EEPROM. The AM93LC86 provides efficient
non-volatile read/write memory arranged as 1024
words of 16 bits each when the ORG Pin is
connected to VCC and 2048 words of 8 bits each
when it is tied to ground. The instruction set
includes read, write, and write enable/disable
functions. The data out pin (DO) indicates the
status of the device during the self-timed
non-volatile programming cycle.
The self-timed write cycle includes an automatic
erase-before-write capability. Only when the chip is
in the write enable state and proper Vcc operation
range is the write instruction accepted and thus to
protect against inadvertent writes. Data is written in
16 bits per write instruction into the selected
register. If chip select (CS) is brought high after
initiation of the write cycle, the data output (DO) pin
will indicate the read/busy status of the chip.
The AM93LC86 is available in space-saving 8-lead
PDIP, SOP and TSSOP packages.
Pin Assignments
Pin Descriptions ^(note)
CS ¹
SK 2
DI 3
DO ⁴
8 _VCC
7 _WP
6 ORG
5 GND
PDIP Package
CS ¹
SK ²
DI ³
DO ⁴
8 _VCC
7 _WP
6 _ORG
5 GND
SOP Package
CS ¹
8 _VCC
SK ²
DI ³
DO ⁴
7 _WP
6 ORG
5 GND
TSSOP Package
Name
CS
SK
DI
DO
GND
VCC
Description
Chip select
Serial clock
Data input
Data output
Ground
Power supply
WP
Write protection (active low)
ORG
Organization
Note: See pin descriptions (continued) for more details
Ordering Information
AM93 LC 86 X X X
Operating Voltage
LC : 2.7V~5.5V,CMOS
Type
86: 16K
Temp. grade
Blank
I
:
:
−^0o4C0o~C+~70+^o8C5o
C
Package
S : SOP-8L
N : PDIP-8L
TS: TSSOP-8L
Packing
Blank : Tube
A : Taping
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev 0.1 Oct 20, 2003
1/12