TCS3103 Datasheet, PDF (4/13 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – LIGHT-TO-VOLTAGE COLOR SENSOR

TCS3103, TCS3104
LIGHT-TO-VOLTAGE COLOR SENSOR
TAOS108B − JULY 2010
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage, V_DD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
Moisture sensitivity level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Solder conditions in accordance with JEDEC J−STD−020A, maximum temperature . . . . . . . . . . . . . . . 260°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
lid ^{NOTE 1: All voltages are with respect to GND.}
Recommended Operating Conditions
a _{Supply voltage, VDD}
v ^{Operating free-air temperature, T}A
Input low voltage on MFP pin, V_IL
ill ^{Input high voltage on MFP pin, VIH}
Load capacitance, C_L
V_DD = 5 V
V_DD = 5 V
V_DD = 5 V
MIN NOM
4.5
5
−30
−0.5
3.5
MAX
5.5
70
1.5
5.5
100
UNIT
V
°C
V
V
pF
t _{Electrical Characteristics VDD = 5 V, TA = 255C, RL = 10 kW (unless otherwise noted)}
G _{s PARAMETER}
TEST CONDITIONS
MIN TYP MAX UNIT
V_D
A ^t _VOM
s ^{n IDD}
Dark voltage, V_OR, V_OG, V_OB
Maximum output voltage
Supply current
e _{ReR Irradiance responsivity, VOR}
am ^nt R_eG Irradiance responsivity, V_OG
co _{ReB Irradiance responsivity, VOB}
l _{Gain scaling, 1× to 2×}
a Gain scaling, 1× to 4×
E_e = 0
V_DD = 5 V
V_DD = 5 V, E_e = 0
λ_p = 470 nm, Gain select = 1×
λ_p = 524 nm, Gain select = 1×
λ_p = 640 nm, Gain select = 1×
λ_p = 470 nm, Gain select = 1×
λ_p = 524 nm, Gain select = 1×
λ_p = 640 nm, Gain select = 1×
λ_p = 470 nm, Gain select = 1×
λ_p = 524 nm, Gain select = 1×
λ_p = 640 nm, Gain select = 1×
0
4.8
0.3
0.18
0.15
1.9
3.8
270
0.02
0.09
0.4
0.13
0.25
0.06
0.2
0.13
0.12
2
4
10 mV
V
500
μA
mV/
(μW/cm²⁾
0.5
0.31
mV/
(μW/cm²⁾
0.25
mV/
(μW/cm²⁾
2.1
4.2
T_c
Temperature coefficient of output voltage
λ_p ≤ 700 nm, −30°C ≤ T_A ≤ 70°C
± 360
ppm/°C
ic _{Dynamic Characteristics, VDD = 5 V, TA = 255C, RL = 10 kW (unless otherwise noted)}
n ^PARAMETER
TEST CONDITIONS
Gain select = 1×
h _tr
Output pulse rise time, 10% to 90% of final value Gain select = 2×
Gain select = 4×
c _{Gain select = 1×}
e ^tf
Output pulse fall time, 90% to 10% of final value
Gain select = 2×
T ^{Gain select = 4×}
MIN TYP MAX
12
24
40
15
28
44
UNIT
μs
μs
μs
μs
μs
μs
Integrated noise voltage
f = DC to 1 kHz, E_e = 0
200
μVrms
t_PZX Propagation delay, output active
V_DD ramp 0 V to 5 V
50 ms
The LUMENOLOGY r Company
r
Copyright E 2010, TAOS Inc.
r
www.taosinc.com
3