N40P107 Datasheet, PDF (2/8 Pages) List of Unclassifed Manufacturers – Single Module (without IC, with push button)

EasyPoint^TM N40P107
Datasheet - Electrical Characteristics
5 Electrical Characteristics
5.1 Mechanical Specifications
Table 1. Mechanical Specifications
Parameter
Number of operating shafts
Shaft material
Housing material
Shell material
Travel (XY operation)
Travel (Z push operation)
Directional operating force (XY direction)
Push operating force (Z direction)
Vibration
Operating life – XY direction
Operating life – Push Z direction
Shaft strength (XYZ direction)
Over force
5.2 Electrical Specifications
Table 2. Electrical Specifications
Parameter
Min
Contact resistance
Dielectric withstanding voltage
100
Insulation resistance
100
Bouncing (On/Off)
5.3 Environmental Specifications
Table 3. Environmental Specifications
Parameter
Operating temperature range
Storage temperature range
Humidity non-condensing
Degrees of protection
Note
Single shaft
LPC
LPC & PA46
Stainless Steel or Copper alloy
±1.00mm (±10%)
0.22mm (±0.05mm)
0.35N (±0.10N) or 0.55N (±0.15N)
1.80N (±15%)
10-500-10Hz 15 minutes, 12 cycles, 3 axes (total 36 cycles)
Each direction > 1 million cycles
> 1 million cycles
> 5.0kgf
1.5kgf > 100k cycles
Max
Unit
500
mΩ
Vac
MΩ
5
ms
Note
Norm: EIA-364-23
Norm: EIA-364-20
Norm: EIA-364-21, 100Vdc
Rate: 2 times/sec.
Note
-20 ~ +70ºC
-40 ~ +85ºC
5 ~ 85% RH
IP 5X
www.ams.com
Revision 1.6
2-8