TSL13FN Datasheet, PDF (1/19 Pages) ams AG – Light-to-Voltage Converters

TSL13FN_Datasheet, Rev.: 1.0, TSL13FN_Datasheet_[1-00]_Light-To-Voltage Converters
TSL13FN
Light-to-Voltage Converters
General Description
Figure 1:
Added Value of Using TSL13FN
Benefits
Approximates Human Eye Response
High Irradiance Responsivity to Green
Low Supply Current
The TSL13FN is a cost optimized, highly integrated
light-to-voltage optical sensor that contains a photodiode and
a transimpedance amplifier with a 20 MΩ feedback resistor on
a single monolithic integrated circuit. The photodiode active
area is 0.5mm x 0.5mm and the sensor responds to visible light
in the range of 300 nm to 1100 nm. The output voltage is linear
with light intensity (irradiance) incident on the sensor over a
wide dynamic range. These devices are supplied in a surface
mountable package.
Ordering Information and Content Guide appear at end of
datasheet.
Key Benefits & Features
The benefits and features of TSL13FN are listed below:
Features
Single Diode
18.7 mV/(μW/cm²) at λ_p = 525nm
0.8mA Typical
Figure 2:
TSL13FN Block Diagram
Block Diagram
The functional blocks of this device for reference are
shown below:
-
+
ams Datasheet: 2014-Jun-04 [1-00]
Release Date: 2014-06-17, Key Contact: Matt Kroese
Voltage Output
TSL13FN – 1