AS6200 Datasheet, PDF (1/35 Pages) ams AG – The AS6200 IC is a high accuracy temperature sensor system

General Description
Figure 1:
Added Value of Using AS6200
Benefits
• High Measurement Accuracy
• Low Power Consumption
• Supply Voltage Range
• Wide Operating Temperature
• Small PCB Footprint
AS6200
Temperature Sensor
The AS6200 IC is a high accuracy temperature sensor system
that communicates via a 2 wire digital bus with other devices.
It consists of a Si bandgap temperature sensor, an ADC and a
digital signal processor.
It has a very high temperature accuracy (±0.4°C for AS6200) and
an ultra-low power consumption (low operation and quiescent
current) which makes it ideally suited for mobile/battery
powered applications.
The AS6200 is an easy to integrate and use solution, featuring
an factory calibrated sensor, integrated linearization and the
possibility to use 2 different I²C addresses, enabling to use two
AS6200 devices on one bus.
Additionally the AS6200 temperature sensor system also
features an alert functionality, which triggers e.g. an interrupt
to protect devices from excessive temperatures.
Ordering Information and Content Guide appear at end of
datasheet.
Key Benefits & Features
The benefits and features of AS6200, Temperature Sensor are
listed below:
Features
• ± 0.4°C (0°C to 65°C)
• ± 1°C (-40°C to 125°C)
(max. values)
• 6 μA @Operation (typ. @ 4 Hz)
• 0.1 μA@Standby (typ.)
• 1.8V to 3.6 V
• -40°C to 125°C
• 1.6 mm x 1.0 mm (WLCSP)
ams Datasheet
[v1-01] 2016-Jun-17
Page 1
Document Feedback