|
AS5304 Datasheet, PDF (1/13 Pages) ams AG – Integrated Hall ICs for Linear and Off-Axis Rotary Motion Detection | |||
|
AS5304 / AS5306
Integrated Hall ICs for
Linear and Off-Axis Rotary Motion Detection
PRELIMINARY DATA SHEET
1 General Description
The AS5304/AS5306 are single-chip ICâs with integrated
Hall elements for measuring linear or rotary motion using
multi-pole magnetic strips or rings.
This allows the usage of the AS5304/AS5306 in
applications where the Sensor IC cannot be mounted at the
end of a rotating device (e.g. at hollow shafts). Instead, the
AS5304/AS5306 are mounted off-axis underneath a multi-
pole magnetized ring or strip and provides a quadrature
incremental output with 40 pulses per pole period at
speeds of up to 20 meters/sec (AS5304) or 12 meters/sec
(AS5306).
A single index pulse is generated once for every pole pair
at the Index output.
Using, for example, a 32pole-pair magnetic ring, the
AS5304/AS5306 can provide a resolution of 1280
pulses/rev, which is equivalent to 5120 positions/rev or
12.3bit. The maximum speed at this configuration is 9375
rpm.
The pole pair length is 4mm (2mm north pole / 2mm south
pole) for the AS5304, and 2.4mm (1.2mm north pole /
1.2mm south pole) for the AS5306. The chip accepts a
magnetic field strength down to 5mT (peak).
Both chips are available with push-pull outputs
(AS530xA) or with open drain outputs (AS530xB).
The AS5304/AS5306 are available in a small 20-pin
TSSOP package and specified for an operating ambient
temperature of -40° to +125°C.
2 Benefits
⢠Complete system-on-chip
⢠High reliability due to non-contact sensing
⢠Suitable for the use in harsh environments
⢠Robust against external magnetic stray fields
3 Key Features
⢠High speed, up to 20m/s (AS5304)
12m/s (AS5306)
⢠Magnetic pole pair length: 4mm (AS5304) or
2.4mm (AS5306)
⢠Resolution: 25µm (AS5304) or 15µm (AS5306)
⢠40 pulses / 160 positions per magnetic period.
⢠1 index pulse per pole pair
⢠Linear movement measurement using multi-pole
magnetic strips
⢠Circular off-axis movement measurement using multi-
pole magnetic rings
⢠4.5 to 5.5V operating voltage
⢠Magnetic field strength indicator, magnetic field alarm
for end-of-strip or missing magnet
4 Applications
The AS5304/AS5306 are ideal for high speed linear motion
and off-axis rotation measurement in applications such as
⢠electrical motors
⢠X-Y-stages
⢠rotation knobs
⢠industrial drives
Figure 1:
Revision 1.5
AS5304 (AS5306) with multi-pole ring magnet.
Figure 2:
www.austriamicrosystems.com
AS5306 (AS5304) with magnetic multi-pole strip magnet
for linear motion measurement
Page 1 of 13
|
▷ |