AS1901 Datasheet, PDF (1/9 Pages) ams AG – Ultra Low-Power uP Supervisory Circuit

austriamicrosystems
AS1901, AS1902, AS1903
Ultra Low-Power µP Supervisory Circuit
Data Sheet
1 General Description
The AS1901/2/3 family is an ultra low-power supervisory
circuit device.
The device can be used to monitor the supply voltage of
digital systems and microprocessors and initiate a reset
when the voltage goes below a predefined threshold.
The duration of the reset is 5/20/100/500ms (typ.) after
the supply voltage has risen above the threshold.
The AS1901/2/3 exhibit excellent reliability and can
reduce application costs by eliminating all external com-
ponents.
The device is available with different output drivers:
„ _{The AS1901 has a push-pull driver with an active low}
reset.
„ _{The AS1902 uses the same output stage as the}
AS1901, but has an active high reset.
„ _{The AS1903 has an open drain output with active low}
reset.
All devices operate down to a voltage of 1V.
The reset thresholds are factory-trimmable between
2.2V and 3.08V in steps of approximately 100mV.
Each device of the AS1901/2/3 family is offered with four
time-out periods of 5/20/100/500ms.
The extremely low current consumption of only 230nA
(typ) at 3.3V makes the device ideal for use in portable
applications.
All devices are available in a 3-pin SOT23 package.
Figure 1. Functional Block Diagrams
VCC
3
VDD
VCC
2 Key Features
„ _{Low 230nA (typ) Supply Current}
„ _{Precision Monitoring of 2.5-, 3-, and 3.3V-Power}
Supplies
„ _{Supply Voltage Range: 1.0 to 3.6V}
„ _{Reset Threshold Range: 2.2 to 3.1V}
„ _{Available in 3 Versions:}
- AS1901 Push Pull RESETN
- AS1902 Push Pull RESET
- AS1903 Open Drain RESETN
„ _{4 Time-Out Periods Ranging from 5 to 500ms}
„ _{Detection Voltage Accuracy: ±1.5%}
„ _{Temperature Range: -40 to +85°C}
„ _{Package: SOT23-3}
„ _{Pin Compatible to MAX6326/6327/6328}
3 Applications
„ _Computers
„ _{Intelligent Instruments}
„ _Controllers
„ _{Critical Microprocessor and Microcontroller}
Power Monitoring
„ _{Portable/Battery-Powered Equipment}
„ _Automotive
VCC
3
VDD
VCC
AS1901
AS1902
RESETN, ²
RESET
GND
1
Microprocessor
RESET
GND
AS1903
2
RESETN
GND
1
Microprocessor
RESET I/O
GND
www.austriamicrosystems.com
Revision 1.5
1-9