AS1702_1 Datasheet, PDF (1/20 Pages) ams AG – 1.8W Single-Channel Audio Power Amplifiers

AS1702 - AS1705
1.8W Single-Channel Audio Power Amplifiers
Data Sheet
1 General Description
The AS1702 - AS1705 are single-channel differential
audio power-amplifiers designed to drive 4 and 8Ω
loads. The integrated gain circuitry of these amplifiers
and their small size make them ideal for 2.7- to 5V-pow-
ered portable audio devices.
The differential input design improves noise rejection
and provides common-mode rejection. A bridge-tied
load (BTL) design minimizes external component count,
while providing high-fidelity audio power amplification.
The devices deliver 1.8W continuous average power per
channel to a 4Ω load with less than 1% total harmonic
distortion (plus noise), while operating from a single 2.7
to 5V supply.
For reduced component designs, the devices are avail-
able with different gain levels as shown in Table 1.
Table 1. Standard Products
Model
Gain
AS1702 Adjustable (via external components)
AS1703
AV = 0dB
AS1704
AV = 3dB
AS1705
AV = 6dB
Integrated shutdown circuitry disables the bias genera-
tor and amplifiers, and reduces quiescent current con-
sumption to less than 100nA. The shutdown input can
be set active-high or active-low. All devices contain click-
and-pop suppression circuitry that reduces audible
clicks and pops during power-up and shutdown.
The AS1702 - AS1705 are pin compatible with the
LM4895 and the MAX9718A/B/C/D. The devices are
available in a 10-pin MSOP package and a 10-pin DFN
package.
Figure 1. Simplified Block Diagram
2 Key Features
! 2.7 to 5.5V (VCC) Single-Supply Operation
! THD+N: 1.8W into 4Ω at 1% (per Channel)
! Differential Input
! Adjustable Gain Option (AS1702)
! Internal Fixed Gain to Reduce External Component
Count (AS1703, AS1704, AS1705)
! <100nA Low-Power Shutdown Mode
! Click and Pop Suppression
! Pin-Compatible to National Semiconductor LM4895
(AS1705) and Maxim MAX9718A/B/C/D
! Operating Temperature Range: -40 to +85ºC
! Package Types
- 10-pin MSOP
- 10-pin DFN
3 Applications
The devices are ideal as audio front-ends for battery
powered audio devices such as MP3 and CD players,
mobile phones, PDAs, portable DVD players, and any
other hand-held battery-powered device.
Single Supply 2.7
to 5.5V
9
VCC
4
IN+
2
IN-
1
SHDN
3
SHDM
+
–
AS1702/AS1703/
AS1704/AS1705
10
OUT+
6
OUT-
7
GND
RL = 4 or 8Ω
www.austriamicrosystems.com
Revision 1.47
1 - 20