AS1374 Datasheet, PDF (1/14 Pages) ams AG – 200mA, Ultra-Low-Noise, High-PSRR, Dual Low Dropout Regulators

Datasheet
AS1374
200mA, Ultra-Low-Noise, High-PSRR, Dual Low
Dropout Regulators
1 General Description
2 Key Features
The AS1374 is a ultra-low-noise, low-dropout linear reg-
ulator with two seperated outputs. Specifically designed
to deliver 200mA continuous output current at each out-
put pin. The LDOs can achieve a low 120mV dropout for
200mA load current and are designed and optimized to
work with low-cost, small-capacitance ceramic capaci-
tors.
An integrated P-channel MOSFET pass transistor allows
the devices to maintain extremely low quiescent current
(30µA).
The AS1374 uses an advanced architecture to achieve
ultra-low output voltage noise of 20µVRMS and a power-
supply rejection-ratio of better than 85dB (@ 1kHz).
Two active-High enable pins allows to switch on or off
each output independently from each other.
The AS1374 requires only 1µF output capacitor for sta-
bility at any load.
The device is available in a 6-bump WLP package.
! Preset Output Voltages: 1.2 to 3.6V (in 50mV steps)
! Output Noise: 20µVRMS @ 100Hz to 100kHz
! Power-Supply Rejection Ratio: 85dB @ 1kHz
! Low Dropout: 120mV @ 200mA Load
! Stable with 1µF Ceramic Capacitor for any Load
! Guaranteed 200mA Output
! Pull-Down Option in Shutdown (factory set)
! Extremely-Low Quiescent Current: 30µA
! Excellent Load/Line Transient
! Overcurrent and Thermal Protection
! 6-bump WLP Package
3 Applications
The devices are ideal for mobile phones, wireless
phones, PDAs, handheld computers, mobile phone
base stations, Bluetooth portable radios and accesso-
ries, wireless LANs, digital cameras, personal audio
devices, and any other portable, battery-powered appli-
cation.
Figure 1. AS1374 - Typical Application Circuit
Input
2V to 5.5V
CIN
1µF
2
VDD
3
OUT 1
6
EN 1
AS1374
1
OUT 2
4
EN 2
5
GND
Output1
1.2V to 3.6V
COUT1
1µF
Output2
1.2V to 3.6V
COUT2
1µF
www.austriamicrosystems.com
Revision 1.03
1 - 14