MS3116-J-10-6P Datasheet, PDF (65/80 Pages) Amphenol Corporation – Amphenol Miniature Cylindrical Connectors

PC-SE, PC-CE
how to order
PC-SE, PC-CE
To more easily illustrate ordering procedure, part number
PC-SE00A-20-41PW (SR) is shown as follows:
PC-SE 00 SP – 20 – 41 P W (SR)
1
23
4 56 7 8
See code below:
1. Connector Type
“PC-SE” designates bright cadmium plated with clear chromate after
treatment, threaded coupling connector with crimp contacts, incorporat-
ing a spring tower retention system
“PC-CE” designates bright cadmium plated with clear chromate after
treatment, threaded coupkling connector with crimp contacts, incorpo-
rating a nylon waftr retention system to maintain contact postion
2. Shell Styles PC-SE - consult Amphenol for availability.
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle^†
“02” designates box mounting receptacle
“06” designates straight plug
“08” designates 90 degree plug
2. Shell Style PC-CE - consult Amphenol for availability.
“06” designates straight plug
3. Service Class
“SE” designates environmental crimp
“SP” designates potted type crimp
Both of the above are Amphenol ^® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact reten-
tion for size 20 contacts; 9 lbs for size 16 contacts.)
4. Shell Size
“20” designates shell size. Please contact Amphenol for complete
information, as there may be limitations in shell sizes with the PC-SE
and PC-CE series.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designates strain relief clamp.
Indicate optional finishes as follows:
(001) bright cadmium (standard on “PC”)
(003) olive drab cadmium plate
(005) anodic coating - Alumilite^®
(011) chromate treated (Iridite 14-2)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
† This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
63