ES27484T22F21S Datasheet, PDF (54/57 Pages) Amphenol Corporation – Amphenol JT/LJT Subminiature Cylindrical Connectors

JT/LJT — solder
contact connectors
Wall Mounting
Receptacle
Straight
Plug
JT Solder
Amphenol^® LJT and JT Series solder contact connectors
are qualified to Series I and II respectively, of MIL-C-27599.
These connectors use a rigid, hard dielectric insert, which
is molded around the pin and socket contacts. This permits
a higher degree of pressurization across an interface, of up
to 1x10^-3 cc/sec. Contact positional tolerances are also
considerably reduced, with less chance of pin bending.
Shell styles similar to MIL-DTL-38999 crimp connectors are
available along with a large variety of contact sizes and
insert patterns.
A complete line of accessories is also available.
For additional information on Amphenol^® LJT/JT solder type
connectors, ask for Product Data Sheet 158. Contact your
local sales office or
Amphenol Corporation
Amphenol Aerospace
40 – 60 Delaware Avenue
Sidney, New York 13838-1395
Telephone:[phone]
Fax:[phone]
www.amphenol-aerospace.com
Wall Mounting
Receptacle
Straight
Plug
LJT Solder
52